Lilliput Current & Voltage Measurements
The following measurements were taken using the AC/DC adapter that came with the Lilliput.
Vout Current
Disconnected 12.38V 0mA
Standby (red LED) 12.38V 16mA
On with VGA signal 12.28V 554mA
On with loss of VGA input 12.34V 214mA
Note: the Lilliput has a "loss of signal" mode whereby it turns off the backlight but continues to power the logic board. In this mode it continues to draw 214mA. Don't make the mistake of assuming that if you turn off your carPC that the Lilliput goes into Standby (low current) mode. You must either disconnect power to the Lilliput OR press the Power button to turn it completely off.