Telematics and Automotive Infotainment Technologies
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
PSUmoni2140
Your solution for real-time monitoring and control of the CNX-P2140 regulator.
The PSUmoni2140 is a windows application that gives you full access to the inner workings of the CNX-P2140 regulator for easier setup, operation, and debugging of your CarComputer system. Now there is no need to ask "how much power do I need for XXX motherboard or YYY component. You have a visual readout of exactly what power is being consumed both on input and output of the regulator. In addition, the PSUmoni2140 gives you full control over critical timing parameters used to optimize startup and shutdown times of your CarComputer system. No more PIC programmers required! Plus, firmware updates to the P2140 can be done over the full speed USB 2.0 interface!Release of Software Devleopment Kit for the P2140 (4/11/07)
PSUmoni2140 Screen Shot
If you would like to see the PSUmoni2140 in action, download these two videos.
Give us your comments in our support forum.
Video Introduction to PSUmoni2140 - Part 1
Video Introduction to PSUmoni2140 - Part 2
CNX-PSUmoni2140 Specifications |
|
| Connectivity with CNX-P2140 | Full speed USB 2.0 |
| Analog Monitor Points | Battery Voltage (Auto ranging 12V/24V systems) |
| Battery Current | |
| Input Power | |
| Primary Output Voltage (Auto ranging +12/+18.5/+20V scale) | |
| Primary Output Current | |
| Primary Output Power | |
| Secondary Output Voltage (Auto ranging +12/+5V scale) | |
| Secondary Output Current | |
| Secondary Output Power | |
| Total Output Power (Primary + Secondary) | |
| Overall Efficiency (Total Output Power/Total Input Power) | |
| Temperature (0-60°C) | |
| Digital Monitor Points | Battery OK |
| Primary Output Current OK | |
| Secondar Output Current OK | |
| Machine State Indicator | |
| State Timers | |
| Ingition Status (On/Off) | |
| Pulse Start Status (On/Off) | |
| Fan Status (Ok/Fault) | |
| Delay ON Status (On/Off) | |
| ACPI (power button) Status (On/Off) | |
| Power Good Status (Regulator On/Off) | |
| PS_ON Status (Regulator Control On/Off) | |
| USB Connection Status (Connected/Not Connected) | |
| Control Sliders | Shutdown Delay Time (Minutes 0-60, Hours 0-60) |
| Deadman Timer (0-120 Hours) | |
| DelayON Timer (0-60 Seconds) | |
| Bootup Lockout Timer (0-120 Seconds) | |
| Shutdown Lockout timer (0-120 Seconds) | |
| Low Battery Detection Threshold (9V - 24V) | |
| Soft Jumpers | Standby Mode (On/Off) |
| Secondary Output ON (Ignition/DLYON) | |
| Secondary Output OFF (PriOut/Ignition) | |
| Fan (Enable/Disable) | |
| Firmware Upgrades | Firmware upgrades applied to P2140 via USB port |
Copyright 2006 CarNetix